SIRIO 2

Details

DLP Projectors: SIRIO Line

Enquire
Category: Tag:

Additional information

Brand

High brightness single-chip DLP projector

Engineered for the most demanding installations, SIRIO 2 brings a balanced approach to high brightness projection, with a quality of picture that rivals that of the best projectors in its category. Designed to be used with large screen sizes or in brightly-lit light room conditions, where high light output is a necessity, SIRIO 2‘s optical elements maximize light output (7,000 Ansi Lumens) from its dual high power UHP lamps (2x 350W). This star performer that has the power and clarity to satisfy the most demanding viewer and the ability to deliver bright, rich images in real-world lighting conditions.
SIRIO 2 features an optional Calibration probe interfaced with the projector’s built-in processing electronics that allows (through refined feedback algorithms) a real time reaction to the environmental conditions.
SIRIO 2 advanced connectivity: Full Monitoring and Software Upgrade – through a dedicated IP address and a port, service centers can connect with the projector, which will in-turn communicate back a parameter list (i.e. Serial Number, Firmware version, lamp hours used, selected input and resolution, image settings etc.). The service center will have the capability to evaluate a reported issue with the projector and make the necessary adjustments (where possible) to rectify the issue – remotely.
SIRIO 2 also utilizes full 10 Bit video processing, with high definition scaling and de-interlacing capabilities, to create the highest video images quality from all sources (including 3D).
SIRIO 2 comes with SIM2’s Perfect Fit zoom, focus and lens shift memory feature (lens-free 2,40:1).
SIM2’s SIRIO 2 sports PureMovie, PureAction, and PureAction 3D (*) modes – each optimized for the various demands of movie, sports and 3D viewing – and SIM2’s Live Colors Calibration 2 software that enables complete adjustment of the primary, secondary and white point color coordinates of the projector.

SIRIO 2’s cabinet is available in Matte Black finish.

(*) A SIM2 VISUS System is required to initiate this feature (sold separately).

LIGHT ENGINE

DLP® Type Single-Chip DMDs 1080p
Resolution 1920×1080 pixels
3D Features (1)
Brightness (2) up to 7,000 ANSI Lumens
Contrast ratio up to 8,000:1
Special features SIM2 Dynamic Black technology
Perfect Fit technology (3)
PureAction 2D/3D for fast action materials
PureMovie 2D
Lamp power 2 x 350W Lamp
Lamp life expectancy (4) 2.000 hours typical in standard power mode; 2.500 hours in ECO mode

INSTALLATION

Lenses Throw ratio M0 lens 0.77:1 (fixed)
M1 lens 1.21-1.45:1
M2 lens (standard lens) 1.45-1.93:1
M3 lens 1.93-3.67:1
Zoom adjustment motorized
Focus adjustment motorized
Optical shift Vertical +60% / -60% motorized
Horizontal +10% / -10% motorized
Digital keystone adjustment (for 2D and 3D 1080p24 modes)
Picture size (inches diagonal) 30-500 inches
Aspect ratio 4:3, 16:9 Anamorphic, LetterBox, Panoramic, Subtitle, Pixel to Pixel + 3 custom-user adjustments

ELECTRONICS

Horizontal & vertical scan freq. 15-120kHz/48-100Hz, 24Hz@1080p
SDTV PAL (B,G,H,I,M,N,60); SECAM; NTSC autom. selected
HDTV 480p, 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p
PC graphic standard VGA, SVGA, XGA, SXGA, UXGA, WUXGA 10 bit Full Channel Signal Board Video Processing

CONNECTIVITY

Digital 2 x HDMI-HDCP vers. 1.4a
Analog 1 x Graphic RGBVH (VGA-UXGA) (D-sub 15 pin)
1 x Component – Analog YPbPr/RGBs/RGBHV (RCA)
1 x Composite Video
Control 1 x 3 pin MiniDIN (VESA STD) 3D Sync Out connector
1 x RJ45 LAN
1 x RS232 (D-sub 9 pin)
1 x USB connector Remote Control Port (Host Mode Only)
IR Receiver for Remote Control
Miscellaneous 3 x 12V 100mA output (via Jack) for On/Off Screen control 16:9/4:3, Anamorphic Lens
2 x 7-segment Displays for Status indications
8 keys keypad

GENERAL SPECIFICATIONS

Software control upgradable via RS232, serial interface or USB
Mains voltage range 100-240 +/-10% (48/62 Hz), standard DIN power connector
Power consumption maximum dual lamp operation: 900 W
maximum single lamp operation: 460 W
maximum when lamp cooling: 33W
stand-by: less than 1W
Projector dimensions (WxHxD) 464 x 241 x 564 mm
Projector Weight 27 Kg
Packaging dimensions (WxHxD) 564 x 341 x 664 mm
Packaging weight 32 Kg

ACCESSORIES

Supplied Installation and User Manual
AC power cords (2m – 6.6 ft)
Backlit remote control and batteries
Live Colors Calibration software 2.0
RS232 Adapter Cable; USB Wi-Fi adapter
Optional High Precision Probe
SIM2 VISUS Active Glasses (1)
Emitter
Projector ceiling bracket
Anamorphic lens systems (fixed or motorized)

CERTIFICATIONS

Standard EN 60950 – 1 Safety of information technology equipment, including electrical business equipment
UL 60950 & CAN/CSA-C22.2 No. 60950 Safety of Information Technology Equipment
RoHS + RoHS Cina
Marking CE, cULus, CCC
Electro Magnetic Compatibility EMISSION FCC, CFR 47, Part 15 SubpartB, Class B
EN 55022Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement – Class B
Electro Magnetic Compatibility immunity EN 55024 Information technology equipment – Immunity characteristics – Limits and methods of measurement
ENV 50204
Numeric cellular phone electromagnetic field – Immunity Test
(1) A SIM2 3D emitter and glasses pack is required to initiate this feature (sold separately).
(2) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in a totally dark test room with T3 type lens (wide angle zoom settings), brand new lamp at full power, lamp’s native white color temperature, internal test pattern (full white) and in compliance with ANSI IT7.228-1997 specification.
(3) Perfect Fit is optimized for M2 & M3 lenses. Cannot be used with short-throw M0 & M1 lenses.
(4) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty.
The DLP® logo and DLP® medallion are trademarks of Texas Instruments. product specifications are subject to change without notice.
Due to constant product development, specifications and design might be subject to change without notice.