Additional information
| Brand |
|---|
The glass exterior suggests the future, its technological center confirms it. NERO 3 PLUS is a lifestyle product designed for today’s lifestyle. LED is the source of illumination, 1-chip DLP the image technology. This combination ensures that images are bright, sharp and beautifully realistic.
With a specification list that reads: 1,500 lumens of light output (the equivalet of 2,200 lumens on lamp-based projectors), a 30,000:1 contrast ratio and a color gamut 135% that of the NTSC TV standard, this is an impressive projector. Connecting your favorite video sources is simple; thanks to the wide choice of inputs that includes two HDMI sockets.
Easily integrated into any interior design and delivering SIM2-quality picture performance, NERO 3 will enhance your home entertainment experience.
TYPICAL APPLICATION: Medium/large home theaters, media rooms and family/games room with moderate ambient light.
The NERO 3 is offered in crystal-glass surfaced BLACK (NERO 3 BG)
IGHT ENGINE
| Technology | 1 x chip DMD |
| Resolution | Full HD 1920 x 1080 pixels |
| Lighting system | SUPER PureLED technology |
| 3D(*) Features | |
| SIM2 DynamicBlack™ Technology enhanced solution (digital) | |
| Contrast ratio (Full ON/OFF) | >30,000:1 with DynamicBlack™ |
| Brightness | 1,500 lumens (the equivalent of 2,200 lumens(**) of lamp-based projectors) |
| Expected LED lifetime | 20,000 hours |
INSTALLATION
| Lens Throw ratio NERO 3 PLUS | 1.51-2.88:1 (+/-5%) |
| Lens Throw ratio NERO 3 PLUS ST (short throw zoom lens) | 1.23-1.5:1 (+/-5%) |
| Lens shift | V +/-60% /, H +/-10% |
| Digital keystone adjustment | Vertical and Horizontal |
| Picture size (inches diagonal) | 65-200 |
| Aspect ratio | 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments |
ELECTRONICS
| Horiz. & vertical scan frequency | 15-80kHz/48-144Hz; |
| Color System | PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43 |
| PC graphic standards | VGA, SVGA, XGA,SXGA, UXGA, WUXGA |
| SDTV | 480i/p, 576i/p; |
| HDTV | 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p |
INPUTS/OUTPUTS
| Analog | 1 x Component – YCbCr/RGBs (RCA) |
| 1 x Graphic RGBHV/YCrCb (1x D-Sub 15 pin) | |
| 1x S-Video | |
| Digital | 2 x HDMI (v.1.4 with Deep Color) |
| Control | 1 x RS-232 |
| 1 x USB (B type socket) | |
| 1 x USB (Service only) | |
| Miscellaneous | 3D Sync Out |
| 1x 12V 100mA output |
GENERAL SPECIFICATIONS
| Software control | upgradable via RS-232 serial interface or USB |
| Power supply | 100-240 VAC +/-10% (48/62 Hz) |
| Projector weight | 12 Kg. / 26.5 lbs |
| Projector dimensions (WxHxD) | 365x176x502 mm (14.4”x6.9”x19.8”) – lens and feet included |
ACCESSORIES
| Supplied | Installation and user manual |
| AC power cords | |
| Backlit remote control and batteries | |
| Live Colors Calibration software | |
| Optional | SIM2 VISUS Active glasses, Emitter (optional)(*) |
| SIM2 VISUS Active glasses (additional pairs) | |
| SIM2 Universal Ceiling Bracket |
(*) A SIM2 3D emitter and glasses pack is required to initiate this feature (sold separately).
(**) Takes into account Helmholtz-Kohlrausch effect where brightness rises with color saturation. LED projectors produce richer and more saturated colors, thus appearing brighter than a lamp-based display with similar measured lumen specifications..
(1) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in compliance with ANSI IT7.228-1997 specification.
Due to constant product development, specifications are subject to change without notice.