IG Series Outdoor Speaker

Category: Tag:

Additional information


The IG6s2M features the Generation 2 Metal Diaphragm Technology cone that is lighter and stiffer than the original MDT cone. The result is a broadband 3dB increase in sensitivity and more than 4dB in the midrange – making the IG6s2M easier for amplifiers to drive and better sounding with more “open” midrange and greater vocal presence.

  • Purpose-built to be extremely durable in all weather conditions, mounted in-ground
  • Stylish design provides functional rigidity and extra security when buried
  • Generation 2 anodized metal alloy speaker cones (MDT) maintain specified performance over a broad range of temperatures (-20 to +160 degrees F; -29 – +71 C) for consistent sound quality in every season
  • UDIO (upside down/inside out) driver employs voice coils wound both inside and outside the former for extremely accurate linearity, even at extreme volume levels
  • Heavy gauge epoxy-coated stainless steel grille withstands rigors of outdoor living
  • MLS spiderless motor uses specially developed ferrofluid to center the voice coil and eliminates the distortion generated by spiders
  • Sealed magnet gap locks out moisture and debris
  • 1” coincident-mounted tweeter with 6.5” woofer positioned for optimum dispersion
  • LLDP (Linear Low-Density Polyethylene) color-through enclosures are acoustically inert and stand tough under abuse and in extreme conditions
  • Advanced polymer cone surrounds resist UV rays, chlorine, fertilizer and salt spray
  • 70V multi-tap transformer standard for use with the NEAR 6XL power amplifier in 70V operation – can be by-passed for 8 ohm use
  • Signal connection via pre terminated 8-conductor burial grade cable exiting the bottom of the enclosure
  • Color: Mulch Brown enclosure with matching grille
  • Frequency Response – 45Hz-17.5kHz, +/-2.5dB
  • Sensitivity (1W/1m) – 87dB
  • Dispersion – 360 Degrees
  • Power Requirements (@8 ohms)  – Up to 150 Watts (Ave);
  • Power Requirements (@70V) – 64W, 32W, 16W, 8W, 4W
  • Dimensions  – 16” Diameter at Base x 17.75” High
  • Product Weight – 7.48kgs
  • Maximum SPL @1m (1/2 space) – 108dB
  • Input Terminations – 8 Cond. Cable
  • Environmental – Engineered to Meet or Exceed Mil-Std-810 (Humidity, Salt Air, Heat, Cold, Immersion); IEC IP65


• (1) 6.5” Metal-Alloy Diaphragm UDIO Woofer, MLS Voice Coil Guidance, UV and Chemical-Resistant Rubber Surround

• (1) 1.0” Titanium-Alloy Diaphragm Tweeter, Ferrofluid Thermo Coupling & Damping, UV and Chemical-Resistant Rubber Surround, Corrosion-Resistant Magnet Assembly