HDMI & VGA Auto Switching Wallplate

A perfect “no-control needed” technology

SKU: STKa7008ca2 Category: Tag:

Additional information

Weight 0.3 kg
Dimensions 16 × 13 × 6 cm

BYOD and in seconds collaborate with your colleagues with full audio and video in stunning 4K UHD. A must for conference rooms and huddle spaces.

ZIG-POEWP-100TX – HDMI/VGA Auto-switching wall plate, HDBaseT transmitter over single CAT5e/6 cable up to 100 meters.  ZIG-POEWP-100TX can be used stand-alone as an HDBaseT wall-plate transmitter, but really shines when paired with the ZIG-RXAV-100 receiver & audio amplifier. A perfect “no-control” control system using “on-connection” technology to fire up projectors, drop screens and control lighting in small rooms.

Key Features –

  • ULTRA HD 4K Certified HDBaseT Extender
  • Auto-switching wall-plate.
  • HDMI and VGA w/Audio inputs – VGA can be configured as Component, Y/C or C.
  • HDMI 1.4 (4096×2160@24 Hz (YUV 4:4:4, 8-bit)
  • HDCP 1.4 / 2.2 /2.3
  • Autonomous EDID management
  • Supports HDR
  • Support Dolby Atmos, Dolby TrueHD, Dolby Digital Plus DTS HD-Master and more.
  • Supports CEC pass-through
  • RJ-45 ports support HDBaseT up to 330-feet / 100-meter for 1080p
  • RJ-45 ports support HDBaseT up to 230-feet / 70-meter for 4K
  • 48V IEEE POE – remote or source
  • ZigNet setup and control – or control from ZIG-RXAV-100 hand-held remote simple automation or integrate into 3rd party controller.
  • The wall plate auto switching is based on sensing the +5V signal from the HDMI source or from the VGA source.  This is the activity signaling pin.


Signal INHDMI Connector
Signal INVGA Connector
Extension TransportHDBaseT
Max. ResolutionHDMI 1.4 (4096×2160@24 Hz (YUV 4:4:4, 8-bit)
HDCP1.4 / 2.2 / 2.3
EDIDAutonomous EDID mangement
Maximum Throughput10.2-GBPS
Signal IN3.5mm stereo jack follows VGA port
ESD ProtectionHuman body model: ±8kV (air-gap discharge), ±4kV (contact discharge)
Cable Distance100-M (Max.) for 1080p
Cable Distance70-M (Max.) for 4K
AUDIO SupportSupport Dolby Atmos, Dolby TrueHD, Dolby Digital Plus DTS HD-Master and more.
ControlSupports dual voltage IR 5-volt / 12-volt
Power source48V IEEE POE – remote or source
Secondary Power SourceAux Phoenix 5-VDC (If used with 3-rd party receiver)
HDBaseTRJ-45 – port is dual use. Can be used as an Ethernet port when programming or controlling the device.
Wall MountableYes – 2 Gang Decora Style
ZigNet DiagnosticsYes