Additional information
| Brand |
|---|
These switches combine the configurability of a matrix switcher with the power and scalability of Ethernet to support hundreds of AV over IP endpoints. M4300 and M4500 switches offer IGMP Plus and greatly simplify system architectures at a dramatically lower price point.
re-configured for out-of-the-box use
NETGEAR IGMP Plus™ enables instant multicast functionality for most AV over IP installations
Cost effective aggregation
Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies
Simplified system architecture
Optimized for “Spine and Leaf” redundant AV installations, with or without MLAG between spine switches
High capacity for AV over IP streams
Up to 320 TX / 320 RX (10 Gigabit) nodes all line rate with each other in a redundant spine and leaf architecture
VLAN configuration flexibility
IGMP Plus is default on VLAN 1 out of the box and can be configured on another VLAN for automatic IGMP across switches on that VLAN
Power and fan redundancy
2 power supply units (APS750W) and 6 redundant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy
- Model Description : M4500 Managed Switch with 48x10G/25G SFP28 and 8x100G QSFP28 ports
- Ordering Number : XSM4556
- Acoustics : 68.0dB @ 25°C (77°F) – the noise is reduced when the two PSUs connect to a power source
- Power Consumption (Max) : 394 Watts
- 25G SFP28 Ports : 48 SFP28 ports (1x10G default mode, other modes can be 1x25G and 1x10G)
- 100G QSFP28 Ports : 8 QSFP28 ports (1x100G default mode, other modes can be 1x50G, 1x40G)
- PSU and Fans : 2 modular Power Supply Units and 6 modular Fan Trays come pre-installed
- Management : CLI only (local console, telnet port 1223 and SSH port 1234)
- Management Ports : 1G Ethernet service port for out-of-band management (OOB, RJ45)
- RS232 straight-through serial RJ45 for local management console
- Form Factor : Full width 1U (508mm depth) with two mounting ears (front) and rail kits (back)