HDMI Video Extender With Ultra-HD AV, IR, RS232 and Ethernet (Sender)


Additional information


This product is a Class A HDBaseT compliant Sender (Transmitter) that supports a 100-meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.

Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby providing compatibility to most standards.

The HBX-S includes a universal 5v power supply. IR emitter and IR detector cables are also included.

Not compatible with the ECHO Family of products.


  • Fully Compliant with HDBaseT standard
  • Supports virtually all HDMI and DVI resolutions including 4K UHD
  • Extends, Video, Audio, RS-232, IR, and Ethernet
  • Supports extension to 100 m (330 ft)
  • Fully isolates grounds between TX and RX sides
  • Compact, Rugged, Reliable, and Economical
  • Plug and play, no configuration needed
  • Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs
Video Standards DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including
12 bit colour depth, 3D video and 4K support)
Signal Type TMDS
Resolutions DVI signal – VGA (640×480) thru WUXGA (1920×1200)
HDTV signal – 480i through 1080p
Digital Cinema – 4K30 4:4:4 or 4K60 4:2:0 (4096×2160) up to 60 m
Audio Formats All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD
Master Audio (32-192 kHz sample rate)
DDC Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP
CEC Pass-Thru CEC for Consumer Electronics Control compatible devices
RS232 Bidirectional (full-duplex) any baud rate up to 115,200
Ethernet 100BaseT Ethernet LAN
IR Extended in both directions. Carrier modulation range from 30 kHz to 60 kHz
Power Supply 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated
Power Sender & Receiver: 10 watts maximum
Temp/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
Cooling Convection
Mounting End plates with hole for surface mounting
Enclosure type Metal (Aluminium ends, Aluminium Extrusion)
Dimensions 1.0″ H x 3.9″ W x 3.9″ D (25mm H x 100mm W x 100mm D)
Depth excludes connectors
Product weight Sender 9.3 oz (0.58 lb or 264 g)
Receiver 10 oz (0.63 lb or 284 g)
Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, universal power supply, manual, and packaging
Safety CE
MTBF 90,000 hours (Calculated Estimate)
Warranty 3 years parts and labour