Additional information
| Brand |
|---|
The AVG-HD350A is a feature packed HDMI 2.0 extender set consisting of a Transmitter and a Receiver. HDMI signal is input into the transmitter and the HDBaseT technology is used to transmit high-resolution 1080p / 4K HDR HDMI signals to the receiver up to 70 / 40m via a Cat5e / Cat6a cable.
Key Features
- Supports HDMI 2.0, resolutions up to 4K@60Hz 4:4:4 HDR.
- HDMI input supports HDCP2.2, and the output supports HDCP Active/Passive.
- Maximum transmission distance is up to 40m for 4K and 70m for 1080p.
- Features video resolution up-scaling.
- SPDIF out on receiver for source audio de-embedding.
- 18Gbps high bandwidth.
- Advanced EDID management.’
- Test pattern generator.
- Bidirectional IR, RS232 and 24V PoC.
- ARC, and CEC pass through.
- LED indicators for operating status.
- Firmware up-gradable.
| Transmitter | Receiver | |
| Video | ||
| Input | (1) HDMI | (1) HDBT |
| Input Connector | (1) Type-A female HDMI | (1) RJ45 |
| Input Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit HDR10 | Up to 4Kx2K@60Hz 4:2:0 |
| Output | (1) HDBT Out | (1) HDMI |
| Output Connector | (1) RJ45 | (1) Type-A female HDMI |
| Output Resolution | Up to 4Kx2K@60Hz 4:2:0 | Up to 4Kx2K@60Hz 4:4:4 8bit HDR10 |
| Audio | ||
| Input | – | (1) ARC Audio In |
| Input Connector | – | (1) Toslink Connector |
| Output | (1) ARC Audio Out | (1) Audio Breakout |
| Output Connector | (1) Toslink connector | (1) Toslink connector |
| Audio Format | Supports PCM, Dolby Digital, Dolby True-HD, DTS and DTS-HD. | |
| Frequency Response | 20Hz – 20KHz, ±3dB | |
| Max Output Level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal | |
| THD+N | < 0.05% (-80dB), 20Hz – 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level) | |
| SNR | > 85dB, 20Hz-20 kHz bandwidth | |
| Crosstalk Isolation | > 70dB, 10KHz sine at 0dBFS level (or max level before clipping) | |
| L-R Level Deviation | < 0.3dB, 1KHz sine at 0dBFS level (or max level before clipping) | |
| Frequency Response Deviation | < ± 0.5dB 20Hz – 20KHz | |
| Output Load Capability | 1KΩ and higher (Supports 10x paralleled 10KΩ loads) | |
| Stereo Channel Separation | >70dB@1KHz | |
| Control | ||
| Control Part | (1) Test Pattern button,(1)1080P → 4K button,
(1) EDID 4-pin DIP switch, (1) FW, (1) IR In, (1) IR Out, (1) RS232 |
(1) ARC Mode button, (1) FW,(1) IR In, (1) IR Out, (1) RS232 |
| Control Connector | (1) Micro-USB port,(2) 3.5mm jacks,
(1) 3-pin terminal block |
(1) Micro-USB port,(2) 3.5mm jacks,
(1) 3-pin terminal block |
| General | ||
| Bandwidth | 18Gbps | |
| HDMI Standard | 2.0 | |
| HDCP Version | 2.2, 1.4 compliant | |
| CEC | Pass-through | |
| Bidirectional PoC | Supported | |
| HDMI 2.0 Cable Length | 4K@60Hz 4:4:4 ≤ 5m, 4K@60Hz 4:2:0 ≤ 15m, 1080P ≤ 20m | |
| Transmission Standard | HDBaseT | |
| Transmission Distance | 1080P@60Hz ≤ 229 feet (70 meters),4K@60Hz ≤ 131 feet (40 meters) | |
| Operation Temperature | -5~ +55℃ | |
| Storage Temperature | -25 ~ +70℃ | |
| Relative Humility | 10%-90% | |
| Power Supply | Input:100V~240V AC; Output:24V DC 1.25A | |
| Power Consumption | 12W (Max) | |
| Dimension (W*H*D) | TX/RX: 140mm x 19.5mm x 84mm | |
| Net Weight | TX:275g, RX:290g | |