8001-1

GUDE

Details

5-fold switched and outlet-metered PDU

Enquire
Category: Tag:

Additional information

Brand

Expert Power Control 8001-1 for increased operational reliability and energy efficiency in DIN rail installations
  • Fewer and shorter failures of IT and AV installations
  • Detect AV and IT problems at an early stage: Proactive power and environment monitoring
  • Increased energy efficiency (Green IT and AV): Reduction of electricity costs and CO2 emissions
  • Integrate anywhere: Quickly and easily integrate anywhere with API interface: REST API, HTTPS, SNMP, MQTT and Telnet
  • Fix AV and IT problems quickly and effectively: Reboot remotely, directly on the device or with an automatic restart thanks to integrated Watchdog
Key Features
  • Event and schedule controlled switching
  • Precise current metering per power outlet of up to 9 units and residual current
  • Connector for plug-and-play sensors for real-time monitoring
  • Fast and easy installation on support rails with hat profile
  • NTP function can be activated
  • More flexibility through Radius, Modbus TCP and MQTT 3.1.1 support
Switching function
  • Each power port can be switched via HTTP/S, Telnet, SSH, SNMP or command line interface
  • Programmable on/off sequences for remote reboots (Remote Reboot)
  • Power ports can be switched when preset sensor thresholds are exceeded
  • Self-healing function thanks to 5-channel watchdog: The power ports can be assigned its own Watchdog (ICMP/TCP), which initiates an automatic restart if necessary
  • Switching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure
  • Current peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second
Metering function
  • Power consumption metering (kwH) per power outlet with 2 energy counters: one counter counts consistently, the other counter is resettable
  • Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
  • Connector for combined plug-and-play sensors (temperature, humidity and air pressure) to prevent physical hazards that often occur, such as overheating and increased humidity or air pressure.
Security
  • Generation of status messages via e-mail, syslog, SNMP traps, Telnet, SSH and MQTT depending on set thresholds of sensor measurement
  • Encrypted e-mails (SSL, STARTTLS)
  • Access protection by IP access control
  • Encrypted communication through SSH
  • Secure Login via SSL
  • Beeper for audible alarm when sensor limits are exceeded/deceeded
Operation
  • Easy-to-read LED display for displaying total current, IP address, sensor values and error messages
  • Firmware update via Ethernet during operation (no restart required)
  • Simple and flexible configuration via web browser, Windows or Linux program
  • Dynamic assignment of an IP address via DHCP or manual assignment of static IP address
  • Convenient control on the go via free GUDE Control+ app (Android and iOS)
  • Rapid commissioning thanks to free and reliable drivers from our technology partners
Electrical Connections
  • 1 Mains connection with 230 V alternating voltage (terminal clamps)
  • 5 load outputs (terminal clamps)
  • 1 Ethernet connector RJ45 (10/100 Mbit/s)
  • 1 connector (RJ45) for plug-&-play sensors
Technical Details
  • Housing form: for mounting rail with top hat profile
  • LxHxD: 143 x 65 x 90 mm
  • Weight: approx. 400 g
  • Operating temperature: 0-45 °C
  • Storage temperature: -20 – 70 °C
  • Relative humidity: 0 – 95 % (non condensing)
Scope of delivery
  • Expert Power Control 8001-1
  • Quick start guide