IP relay control with 3 channels and energy metering


Additional information


Expert Net Control 2314-1 for more security and surveillance in IT infrastructure
  • Demonstrably fewer and shorter outages of your critical IT and AV infrastructure
  • More control through remote access to switchable relay outputs
  • Detect AV and IT problems at an early stage: Proactive power and environment monitoring
  • Increased energy efficiency (Green IT and AV): Reduction of electricity costs and CO2 emissions
  • Remote switching of 3 relay outputs
  • Detailed energy measurement per output
  • Connector for plug-and-play sensors
  • Fast and easy mounting on DIN rail
  • NTP function can be activated
  • Special High-Inrush relays prevent sticking of relay contacts during witch on pulse peaks
Switching functions
  • 3 switchable, potential-free relay outputs with 16 A switching capacity
  • Each power port can be switched via HTTP(S), SNMP, ModbusTCP or command line interface via Telnet, SSH, MQTT and serial interface
  • Automatic switching of relay outputs depending on sensor thresholds or inputs possible
  • Programmable switch-on/switch-off sequence
  • Simultaneous switching on of several switching outputs is prevented by automatic latency of 1 second
  • Output states are indicated by two-color LEDs on the front panel
  • Relays have high contact reliability even with very small loads
  • Self-healing function thanks to 3-channel watchdog: Each power port can be assigned its own Watchdog (ICMP/TCP), which initiates an automatic restart if necessary
Technical Details
  • Measurement of key electrical parameters: current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
  • Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
  • LxWxH: 10.5 x 9 x 7 cm
  • Weight: approx.  280 g
  • Operating temperature: 0-50 °C
  • Storage temperature: -20 – 70 °C
  • Relative humidity: 0 – 95 % (non condensing)
Electrical Connections
  • Terminal clamps for power supply with 12-24 V AC/DC voltage
  • 3 switchable outputs (industrial clamp, 3 fold)
  • 1 sensor connector (RJ45) for plug-and-play sensor
  • 1 Ethernet connector RJ45 (10/100 Mbit/s)